Single component thermal conductive gel coating machine equipment
Application scope
Used for single component adhesive that does not require heating during construction
Conventional models are suitable for adhesives with viscosity below 850000 mPa. s (cp)
Customized HP models can adapt to high viscosity adhesives with a viscosity of 5 million mPa, s (cp) or less
dapt to adhesives that do not contain or contain small amounts of hard micro fillers
There are two types of models available: pneumatic and electric, with the conventional pneumatic type being used. Electric PLC precise control type can be used for online quantitative measurement.
|
Pressure ratio |
72:1 |
72:1 |
72:1 |
72:1 |
|
Outlet pressure range |
0-432Br |
0-432Bar |
0-432Bar |
0-432Bar |
|
Maximum reciprocating displacement |
0.21L |
0.21 L |
0.21L |
0.21L |
|
Adapt to viscosity |
Below 100000 cp |
Below 850000 cp |
Below 850000 cp |
Below 5 million cp |
|
Lifting method |
Pneumatic double column |
Pneumatic double column |
Pneumatic double column |
Pneumatic enhanced double column |
|
Pressure plate size |
No pressure plate |
285mm |
575mm |
285mm |
|
Weight (kg) |
About 110 |
About 115 |
About 200 |
About 180 |
|
External dimensions in cm (width, depth, height) |
Approximately 75 70 120 |
Approximately 75 70 120 |
About 98 78 146 |
Approximately 80 75 130 |
|
Using air pressure |
3-6Bar |
3-6Bar |
3-6Bar |
3-6Bar |
|
On site Gas source displacement requirements |
1m3/min |
21m3/min |
E1m3/min |
21m3/min |